0204 515 1229
©2024 REA Solar. All Rights Reserved.
SOLAR POWER
|
|
SOLAR ONLY
|
BATTERY
|
BOTH
Install solar for little to no upfront cost and pay by the month lile your electricity bill only lower. Why rent power when you can own it for less !
The information below outlines guide based off a standard solar installation and system yield comparison with a conventional DC inverter rating. Actual performance may vary depending on location, angle and orientation and is to be used as a guide only.
COMPETITOR
|
VS |
|
SINGLE POINT OF FAILURE
|
PERFORMANCE |
INDEPENDENT PERFORMANCE
|
HIGH VOLTAGE DC NO CIRCUIT PROTECTION
|
SAFETY |
AC WIRING COMPLETE CIRCUIT PROTECTION
|
OVERALL SYSTEM MONITORING ONLY
|
RELIABILITY |
24/7 PANEL LEVEL MONITORING TRACKING
|
Unleashing the true potential Solar Energy with technological breakthroughs in component raw materials and manufacturing process. The Fusion module fuses high efficiency crystalline cell sinto a uniform sheet with a conductive rear contact paste increasing the solar surface area and overall energy yield.
- Each panel is connected in parallel using an engage AC trunking cable
- Each panel operates independently with an MPPT (Maximum Power Point Tracker) on each panel
- Panel level performance monitoring and temperature monitoring to maximise performance
- Cable running from the solar panels through the home is the same that powers your appliances
- System is completely circuit protected using mains circuit breaker in switchboard
- 12V system startup for longer operating window
- No risk of DC and faults that cause solar fires
- Lower cost per kWh (actual generated energy)
- Fewer panels required to produce required energy
- Double rated operating life and warranty
- Each panel is connected together in series so if one panel is disconnected the entire string
is down
- System connected to central inverter with one (Maximum Power Point Tracker)
- System operates at the Lowest performing panel and no panel level monitoring is available
- Cable running from the solar panels through the home is up to 600V Direct Current
- System cannot be circuit protected so rooftop isolators must be fitted by law for manual
shutdown
- High risk of DC arc faults and system fire due to high DC voltage and single point of failure
- Lower cost per kW and higher cost per kWh (actual generated energy)
- More panels required to produce required energy
- Reliability and warranty is typically half
Going solar has never been easier with our expert team of in house Energy Advisors. We design a bespoke solution that best matches your energy needs and provides the lowest cost and fastest return on investment using the worlds most advanced solar technology.
Contact us via our website or call us direct and our friendly staff will collect your information and requirements then allocate you a personal REA Energy Advisor.
Your Energy Advisor will make contact to answer any initial questions you may have and schedule a time that suits to inspect your property and present the solar technology.
During your solar technology presentation your Energy Advisor will design your solar system and provide all technical information system cost and savings calculations.
Once your solar system is designed and you are happy with the solution you will be provided a comprehensive proposal to agree and sign then your installation is scheduled.
|
|
|
MORE POWER |
|
|
WORLDS |
|
|
25 YEAR |
|
|
24/7 MONITORING |
Choosing the right solar power system for your home is an important decision as its investement in lower cost clean energy for you and your family for the next 25 years.
There is a big difference between a cheap solar system that costs less up front and delivers less energy and a value for money system that produces more power and more energy savings.
Our mission is to create the most value for money solar power investment in Australia by providing a higher performing solar system that requires no ongoing costs to maintain and delivers guranteed performance reliably for over 25 years.
©2024 REA Solar. All Rights Reserved.